Handle Shapes
1) PLEASE NOTE THAT NO TWO BRUSH HANDLES ARE THE SAME AND SHAPES WILL ALWAYS VARY.
2) I HAND TURN ALL BRUSH HANDLES ON A LATHE. THE HANDLE SIZES LISTED WITH THE IMAGES ARE JUST EXAMPLE SIZES BASED ON THE MOST POPULAR KNOT SIZES OF 24MM-25MM.
3) MOST SHAPES WORK WITH ANY KNOT THAT YOU WANT, BUT PLEASE NOTE THAT THE HANDLE WILL BE LARGER IF THE KNOT IS LARGER. KINDA A NO-BRAINER, BUT I GET THAT QUESTION OFTEN.
4) THE MEASUREMENTS BELOW ARE ONLY EXAMPLES AND NOT OFFICIAL SIZES OR LIMITATIONS. IF YOU HAVE A SPECIFIC REQUEST, OF COURSE, I WILL ENTERTAIN IT AND MAKE THE HANDLE THE BEST I CAN.
5) THE SLANTED FLUTES ARE ONLY AVAILABLE ON THE SPECIALTY SHAPES: "YOHANN," "INTERROBANG," "TMESIS," AND "EMILIA." I DO NOT ALTER THOSE HANDLE SHAPES.
6) I WILL ONLY ADD THE STRAIGHT PARALLEL FLUTED BOTTOMS TO THE FOLLOWING HANDLES:
"BOB"
"TSE"
"DWW-3" OR "DWW-NG"
"JULIE"
"BISHOP"
"PI DAY"
"ODYSSEY"
"ILIAD"
"LJ"
"TYRION"
"TUXEDO"
"FRANCISCO"
"1301"
"SCORPION-SB" NOT SCORPION
"BECKY-SB" NOT BECKY
"RAPTOR-SB" NOT RAPTOR
"SB" STANDS FOR SOFT BOTTOM MEANING THE BOTTOM IS ELONGATED BY ABOUT 3-4MM AND ROUNDED RATHER THAN RAVING THE "SHARPER" EDGE.
"Serendipity" shape
Average height: Typically @63-64mm with a 24-26mm knot. The size varies with the knot selected.
"TSE" shape
Average height: Typically @59-60mm with a 24-25mm knot. The size varies with the knot selected.
"7-12" shape
Average height: Typically @57-58mm with a 24-25mm knot. The size varies with the knot selected.
"Bob" shape
Average height: Typically @57-58mm with a 24-25mm knot. The size varies with the knot selected.
"Tyrion" shape
Average height: Typically @57-58mm with a 24-25mm knot. The size varies with the knot selected.
"Zydeco" shape
Average height: Typically @69-70 with a 24-25mm knot. The size varies with the knot selected.
"Tuxedo" shape
Average height: Typically @53-54mm with a 24-25mm knot. The size varies with the knot selected.
"Becky-SB" shape, Just like a "Becky" shape w/ a soft beveled bottom.
Typically @63-64mm with a 24-25mm knot. The size varies w/ the knot selected.
"Julie" shape
Average height: Typically @57-58mm with a 24-25mm knot. The size varies with the knot selected.
"LJ" or "Little Jonny" shape
Average height: Typically @51-52mm with a 24-25mm knot. The size varies with the knot selected.
(Notice how similar that YAQI’s handle looks to this shape. This design preceded YAQI’s handle by two years.)
"Iliad" shape
Average height: Typically @68-69mm with a 24-25mm knot. The size varies with the knot selected.
"Raptor" shape
Average height: Typically @58-59mm with a 24-25mm knot. The size varies with the knot selected.
"Yohann" shape
Average height: Typically @56-57mm with a 24-25mm knot. The size varies with the knot you choose. 5 deep slanted round flutes on the bottom. Premium shape. This shape adds $28 to the price of your brush.
"Francisco" shape
Average height: Typically @63-64mm with a 24-25mm knot. The size varies with the knot selected. This is a combination of an Interrobang top and Bishop bottom.
"Regina Caeli" shape
Average height: Typically @53-54mm with a 24-25mm knot. The size varies with the knot selected.
"1301" shape
Average height: Typically @68-69mm with a 24-25mm knot. The size varies with the knot selected.
"Emilia" shape
Typically 59-60mm tall with a 24-25mm knot. The size varies with the knot selected. 5 deep slanted round flutes on the bottom. Premium shape. This shape adds $28 to the price of your brush.
"Sofia" shape
Average height: Typically @64-65mm with a 24-25mm knot. The size varies with the knot selected.
"Odyssey" shape
Average height: Typically @69-70mm with a 24-25mm knot. The size varies with the knot selected.
"Pi Day" shape
Average height: Typically @48-49mm with a 24-25mm knot. The size varies with the knot selected.
"Aquinas" shape
Similar to the "Tyrian" with a beveled bottom. Typically @57-58mm with a 24-25mm knot.
"Interrobang" shape
Avg. height: Typically @64-65mm with a 24-25mm knot. The size varies with the knot selected. 6 deep slanted round flutes on the bottom. Premium shape. This shape adds $30 to the price of your brush.
"Scorpion" shape
Average height: Typically @57-58mm with a 24-25mm knot. The size varies with the knot selected.
“DWW-3” shape,
Average height: Typically @63-64mm with a 24-25mm knot. The size varies with the knot selected.
"Tmesis" shape
Avg. height: Typically @68-69mm with a 24-25mm knot. The size varies with the knot selected. 5 deep slanted round flutes on the bottom. Premium shape. This shape adds $28 to the price of your brush.
"Bishop" shape
Average height: Typically @57-58mm with a 24-25mm knot. The size varies with the knot selected.
"DWW-NG" shape
Average height: Typically @63-64mm with a 24-25mm knot. The size varies with the knot selected.
"Becky" shape
Average height: Typically @60mm with a 24-25mm knot. The size varies w/ the knot selected.
"Scorpion-SB" shape, Just like a Scorpion shape w/ a soft beveled bottom.
Average height: Typically @60-62mm with a 24-25mm knot. The size varies with the knot selected.
"Raptor-SB" shape, Just like a Raptor shape w/ a soft beveled bottom.
Typically @63-64mm with a 24-25mm knot. The size varies with the knot selected.
Handle Shapes
1) PLEASE NOTE THAT NO TWO BRUSH HANDLES ARE THE SAME AND SHAPES WILL ALWAYS VARY.
2) I HAND TURN ALL BRUSH HANDLES ON A LATHE. THE HANDLE SIZES LISTED WITH THE IMAGES ARE JUST EXAMPLE SIZES BASED ON THE MOST POPULAR KNOT SIZES OF 24MM-25MM.
3) MOST SHAPES WORK WITH ANY KNOT THAT YOU WANT, BUT PLEASE NOTE THAT THE HANDLE WILL BE LARGER IF THE KNOT IS LARGER. KINDA A NO-BRAINER, BUT I GET THAT QUESTION OFTEN.
4) THE MEASUREMENTS BELOW ARE ONLY EXAMPLES AND NOT OFFICIAL SIZES OR LIMITATIONS. IF YOU HAVE A SPECIFIC REQUEST, OF COURSE, I WILL ENTERTAIN IT AND MAKE THE HANDLE THE BEST I CAN.
5) THE SLANTED FLUTES ARE ONLY AVAILABLE ON THE SPECIALTY SHAPES: "YOHANN," "INTERROBANG," "TMESIS," AND "EMILIA." I DO NOT ALTER THOSE HANDLE SHAPES.
6) I WILL ONLY ADD THE STRAIGHT PARALLEL FLUTED BOTTOMS TO THE FOLLOWING HANDLES:
"BOB"
"TSE"
"DWW-3" OR "DWW-NG"
"JULIE"
"BISHOP"
"PI DAY"
"ODYSSEY"
"ILIAD"
"LJ"
"TYRION"
"TUXEDO"
"FRANCISCO"
"1301"
"SCORPION-SB" NOT SCORPION
"BECKY-SB" NOT BECKY
"RAPTOR-SB" NOT RAPTOR
"SB" STANDS FOR SOFT BOTTOM MEANING THE BOTTOM IS ELONGATED BY ABOUT 3-4MM AND ROUNDED RATHER THAN RAVING THE "SHARPER" EDGE.
"TSE" shape
Average height: Typically @59-60mm with a 24-25mm knot. The size varies with the knot selected.
"7-12" shape
Average height: Typically @57-58mm with a 24-25mm knot. The size varies with the knot selected.
"WW Beehive" shape
These vary in shape more than most shapes based on the knot
"Bob" shape
Average height: Typically @57-58mm with a 24-25mm knot. The size varies with the knot selected.
"Tyrion" shape
Average height: Typically @57-58mm with a 24-25mm knot. The size varies with the knot selected.
"Zydeco" shape
Average height: Typically @69-70 with a 24-25mm knot. The size varies with the knot selected.
"Tuxedo" shape
Average height: Typically @53-54mm with a 24-25mm knot. The size varies with the knot selected.
"Becky-SB" shape, Just like a "Becky" shape w/ a soft beveled bottom.
Typically @63-64mm with a 24-25mm knot. The size varies w/ the knot selected.
"Julie" shape
Average height: Typically @57-58mm with a 24-25mm knot. The size varies with the knot selected.
"LJ" or "Little Jonny" shape
Average height: Typically @51-52mm with a 24-25mm knot. The size varies with the knot selected.
(Notice how similar that YAQI’s handle looks to this shape. This design preceded YAQI’s handle by two years.)